Cases & News
Position : Home > News Blog

The Ultimate Guide to Zero-Emission Jobsite Lighting: HiLight MS 4 & MS 5 Solar Towers

Oct 21, 2026

1. Introduction: The Shift Towards Clean Jobsite Power

Modern construction sites, mining camps, and rental fleets face unprecedented pressure to reduce carbon footprints and cut operational costs. Traditional diesel-powered light towers incur heavy fuel bills, noise pollution, and frequent maintenance intervals.

The HiLight MS 4 and HiLight MS 5 solar light towers offer a future-proof solution—providing high-lumen illumination powered entirely by clean solar energy and long-life lithium battery storage.

2. Key Performance Comparison: MS 4 vs. MS 5

Choosing between the MS 4 and MS 5 depends on your site’s coverage requirements:

  • HiLight MS 4: Tailored for medium-scale operations, generating 102,600 lumens over 3,846 m² with an 11-hour battery autonomy.

  • HiLight MS 5: Engineered for wide-area sites, generating 136,800 lumens over 5,278 m² with an 8-hour battery autonomy.

Both models utilize Class-A SMD LED technology with a luminous efficacy of 168 Lm/W, ensuring uniform light distribution without dark spots.

3. Innovative Charging & Autonomy Features

Equipped with parallel solar panels, the MS series minimizes recharge bottlenecks:

  • Solar Recharge Time: Reaches full capacity in under 2.6 hours under full sunlight.

  • AC Auxiliary Fast Charging: Optional 50A and 100A sockets allow full grid recharging in 2.5 to 5 hours.

  • Extended Autonomy Mode: Built-in dimming capability pushes total autonomous run time up to 85 hours for extended remote deployments.

4. Designed for Extreme Industrial Conditions

Unlike standard solar units that falter under harsh conditions, the HiLight MS series thrives in extreme environments:

  • Operating Range: Performance remains uncompromised from -20°C to +50°C.

  • Wind Resistance: Structural integrity certified up to 110 km/h.

  • Transport Efficiency: Foldable panels allow compact transport dimensions of 2.29 × 1.12 × 2.68 m.

5. Conclusion & Fleet Recommendation

For construction managers and equipment rental providers aiming for lower Total Cost of Ownership (TCO) and zero emissions, the HiLight MS 4 and MS 5 represent the benchmark in modern, zero-fuel lighting technology.

 

  • Q: What is the difference between HiLight MS 4 and HiLight MS 5 solar light towers?

    • A: The primary difference lies in coverage and power output. The MS 4 provides 3,846 m² light coverage with 102,600 lm output and 11 hours of battery storage. The MS 5 offers an expanded 5,278 m² coverage with 136,800 lm output and 8 hours of battery storage.

  • Q: How fast can the HiLight MS series solar light towers recharge?

    • A: Under full sunshine, the parallel solar array recharges the unit in as little as 2 hours and 36 minutes. Additionally, optional external power sockets enable fast AC recharging in 2.5 hours (100A) or 5 hours (50A).

  • Q: How long can the MS 4 and MS 5 operate autonomously?

    • A: In standard battery mode, they provide 11 hours (MS 4) and 8 hours (MS 5) of continuous run time. By engaging the ECO controller’s intelligent dimming function, autonomy can be extended up to 85 hours.

  • Q: Can these solar light towers work in extreme cold or high-altitude environments?

    • A: Yes. The HiLight MS series operates stably in extreme temperatures from -20°C to +50°C and functions at high altitudes without power derating. They are also rated for 110 km/h wind resistance.



Share:
Series Products
Atlas Copco Hilight Tower
HiLight MS 4 & MS 5 Solar Powered Light Towers
View More >
Inquiry
Email
WhatsApp
Tel
Back
SEND A MESSAGE
You are mail address will not be published.Required fields are marked.