Malaysian Customer Test Drive MW350 Water Well Drilling Rig
Today, our company welcomes an important Malaysian customer, who is the senior representative of a local water company in Malaysia. As people’s demand for drinking water quality continues to improve, this customer adheres to the concept of letting the public drink better and healthier water, after a number of visits and comparisons, and finally chose to buy an advanced MW350 water well drilling rig in our company.
Drill Hole Diameter:140-325mm
Drilling depth:350m
Walking speed:2.5km/h
Equipped capacitor:91kW
At this moment, the Malaysian customer has arrived at our company, and the atmosphere at the scene is warm and expectant. Our professional technical team has been fully prepared to welcome the customer to test the MW350 water well drilling rig, which is known for its powerful performance, efficient drilling capability and reliable stability, and is capable of drilling wells accurately under various geological conditions. This drilling rig not only represents the advanced technology level, but also carries the great expectation of the Malaysian client to provide high quality water for its customers.
At the test site, our technicians firstly introduced and demonstrated the functions and operation procedures of MW350 water well drilling rig in detail. From the start-up of the rig to the parameter adjustment during the drilling process, from the maintenance of the equipment to the solution of common problems, the technicians patiently explained one by one to ensure that the customer could fully understand and operate the equipment skilfully. Malaysian customers listened carefully and raised some professional questions from time to time, our technicians gave accurate and detailed answers, which won the high recognition of the customers.
Afterwards, under the guidance of the technicians, the Malaysian customer personally climbed onto the operating platform of the drilling rig and experienced the operation process of the MW350 water well drilling rig. After the drilling rig was started, it ran smoothly and all the performance indexes achieved the expected results. The customer praised the ease of operation and high efficiency of the drilling rig and expressed his satisfaction with the equipment, believing that it can bring new changes to the water supply in Malaysia.
This trial is not only a comprehensive test of the performance of MW350 water well drilling rig, but also an in-depth communication and co-operation between our company and the Malaysian customer. In the future, our company will continue to provide customers with a full range of technical support and services to ensure the smooth operation of the MW350 water well drilling rig in Malaysia, to provide the Malaysian people with better quality and healthier drinking water, and to jointly promote the development of Malaysia’s water industry.
MW350 crawler water well drilling rig specification
| MW350 crawler water well drilling rig | |||
| The weight（T） | 8.6 | Drill pipe diameter（mm） | Φ89 Φ102 |
| The hole diameter（mm） | 140-325 | Drill pipe length（m） | 3.0m 6.0m |
| Drilling depth（m） | 350 | Rig lifting force（T） | 22 |
| One-time advance length（m） | 6.6 | Rapid rise speed（m/min） | 18 |
| Walking speed（km/h） | 2.5 | Fast feeding speed（m/min） | 33 |
| Climbing angles（Max.） | 30 | Width of loading（m） | 2.7 |
| Equipped capacitor（kw） | 91 | Hoisting force of winch（T） | 2 |
| Using air pressure（MPA） | 1.7-3.4 | Swing torque（N.m） | 6200-8500 |
| Air consumption（m³/min） | 17-36 | Dimension（mm） | 6000×2000×2550 |
| Swing speed（rpm） | 66-135 | Equipped with hammer | Medium and high wind pressure series |
| The penetration efficiency（m/h） | 15-35 | High leg stroke（m） | 1.4 |
| The engine brand | Yuchai engine | ||
